ISD-2404-L3 industrial managed Ethernet Switch
24 x 10/100/1000 Base-T(X) ports4 x 1/10G uplink SFP+ ports
redundant power supply with 12~48VDC, reverse polarity protection, 6KV overvoltage protection
Extended operating temperature range -40°C to +80°C
IPV4/IPV6 dual stack protocol
TACACS+, ACL, IEEE 802.1X, HTTPS and SSH
supports 9K jumbo frames
G.8032 ERPS, Ring Protection (< 20 ms) Spanning Tree (STP, RSTP & MSTP)
Port-based /Tag-based VLAN, IEEE 802.1ad/QinQ VLAN and protocol-based VLAN
The DigiComm ISD-2404-L3 industrial switches offer 24 x Gigabit Ethernet and 4 Gigabit fiber ports. These ports can be equipped with any SFP modules, e.g. fiber (singlemode, multimode, RJ-45, VDSL) for individual adaptation to the own network and thus guarantee a wide range of applications.
The support of 10/100/1000 Base-T(X) and SFP Gigabit ports makes the DigiComm ISD-2404-L3 suitable for use in complex high-speed networks, which are optimized for high data throughput or low latency.
Depending on the requirement profile, the DigiComm ISD series is available in a manageable Layer 2 or unmanaged version.
With VLAN, SNMP v1/v2 and v3, HTTPS, IGMP v1/v2 and v3 all important and security relevant protocol standards are supported.
24x 10/100/1000Base-T RJ45 port (data)
4x 1/10G uplink SFP+ fiber slot port (data)
1x RS232 console port(115200,N,8,1)
Copper RJ-45 ports
Speed: 10/100/1000 Mbps
MDI/MDIX auto-crossover: Supports 1:1 and cross cable
Auto-negotiation: 10/100/1000 Mbps speed auto-negotiation; full and half duplex
DigiComm Ring protection: Link loss recovery < 20m
Spanning Tree Protocol: IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP
Port Trunk with LACP Static trunk or Dynamic via LACP (Link Aggregation Control Protocol)
19″ inch, 1 height unit
IP Standard: IP40
Redundant voltage: 12~48VDC
Max. Power consumption: standby<35W;fullload<45W
Temperature: -40 to +80°C (operating)